Tripping, Drilling, Rotating, Sliding Operations
Optimize the well trajectory, drill string design, and rig size.
Running Casing & Liner, Completion, Coiled Tubing strings
Simulate run in hole operations for casing, liner, tubing and completion strings
Basic Torque & Drag Calculations
Have a quick estimation of torque & drag and contact side force
Torque and drag and soft string software description
The Torque and Drag and Soft String module enables a quick calculation of hook loads and torque at surface while tripping in or out of the hole, drilling (rotary or sliding mode) or rotating off bottom. The multiple charts enable a quick comparision with actual field data to monitor well bore conditions and calibrate the coefficient of friction in the cased and open hole.
Normalized contact forces are also provided all along the string to identify possible tight spots that deserve greater attention.
This module provides the first level of basic engineering for Torque & Drag.
Soft string versus Stiff String contains an explainantion of the differences between a soft and stiff-string torque and drag model.
Benefits of Torque and drag and soft string
Most drill string failures are due to fatigue, resulting from repeated cyclic bending loads and stresses in tensile or buckled drill pipes.
Torque and Drag and Buckling software allows advanced TnD calculations considering tubulars’ rigidity and buckling effect on drilling operation.
The Torque and Drag and Soft String module enables the highlighting of key design points and provides fast torque & drag calculations for rig sizing purpose
DrillScan will be at the SPE/IADC International Conference & Exhibition – 5-7 March 2019, The Hague (Netherlands)19 February 2019 - 17 h 52 min
DrillScan at the ONS Exhibition & Conference27-30 August 2017, Stavanger (Norway)21 July 2018 - 14 h 10 min
What To Do When RSS Is Not An Option Due To Tight Budget13 July 2018 - 8 h 38 min
